Hot Racing RVO133S06 Stainless Steel Wheelie Bar - E-Revo Revo Slayer Summit
Hot Racing wheelie bar for the 1/10th Traxxas E-Revo, Revo 3.3, Slayer Pro 4X4, and Summit
- Wheelie bar is stainless steel construction
- Blue anodized aluminum spacers/washers
- Tires are hard solid rubber
- Four (4) flat head cap screws
- Two (2) 6 x 14 mm collars
- Two (2) 6 x 5 mm collars
- Four (4) cone washers
- Installation onto vehicle
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
- Horizontal length: 7.2 inch (183mm)
- Width between tires: 2.75 inch (70mm)
- Tire diameter: 31mm
- Tire width: 8mm
- See Hot Racing RWB1330 for replacement/spare tires
FEATURES:
- Blue anodized aluminum spacers/washers
- Tires are hard solid rubber
YOU WILL RECEIVE:
- One (1) wheelie bar assembly- Four (4) flat head cap screws
- Two (2) 6 x 14 mm collars
- Two (2) 6 x 5 mm collars
- Four (4) cone washers
REQUIREMENTS:
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
SPECIFICATIONS:
- Width between tires: 2.75 inch (70mm)
- Tire diameter: 31mm
- Tire width: 8mm
COMMENTS:
Brand | Hot Racing |
---|---|
MPN | RVO133S06 |
Part Type | Wheelie Bars |
Eligible for Free Shipping | No |
Write Your Own Review
More from Hot Racing